Application Guide

Wall tattoos are easy to apply. Just make sure your wall is dry and clean and you follow the instructions carefully. The smoother the surface, the better your wall decal will stick. If your wall sticker is a bit bigger, then get someone to help you with the application.

  • Step 1:

    Put your wall sticker onto a solid surface (table, floor).

    Step 2:

    Press the clear transfer foil onto your graphic. If you don't have a squeegee, use a ruler or a credit card. During transport bubbles might get trapped between your wall sticker and the transfer foil. They have no influence on the end result of your wall art, but smooth them out as much as possible.

    Step 3:

    If your wall sticker consists of several parts, then cut and separate them now.

  • Step 4:

    Make sure the graphic sticks onto the clear transfer foil.

    Step 5:

    Slowly pull the transfer foil with the graphic off the white back paper. It might help, if you turn your wall sticker around, the side with the graphic facing the table.

  • Step 6:

    Position the wall sticker with the transfer foil onto the wall. Make sure the wall is dry and clean.

  • Step 7:

    Use a squeegee, ruler or credit card to press your wall sticker onto the wall.

  • Step 8:

    Now pull the transfer foil carefully away from the wall decal.

    Step 9:

    Check if every part of the wall tattoo sticks solidly onto the wall.

  • Step 10:

    Done! Enjoy your wall tattoo!