|
Step 1: Put your wall sticker
onto a solid surface (table, floor).
Step 2: Press the clear
transfer foil onto your graphic. If you don’t have a squeegee, use a ruler or
a credit card. During transport bubbles might get trapped between your wall sticker
and the transfer foil. They have no influence on the end result of your wall art,
but smooth them out as much as possible.
Step 3: If your wall sticker consists
of several parts, then cut and separate them now.
|
Step 4:Make sure the graphic
sticks onto the clear transfer foil.
Step 5:Slowly pull the transfer foil with the graphic
off the white back paper. It might help, if you turn your wall sticker around, the side with the graphic facing the table.
|
Step 6:Position the wall sticker
with the transfer foil onto the wall. Make sure the wall is dry and clean.
|
|
Step 7:Use a squeegee, ruler
or credit card to press your wall sticker onto the wall.
|
Step 8: Now pull the transfer
foil carefully away from the wall decal.
Step 9: Check if every part
of the wall tattoo sticks solidly onto the wall.
|
Step 10:
Done! Enjoy your wall tattoo!
|